Obsolete - No longer available
Description
The AP01M-1220 is used when is a complete, easy-to-use door control is required.
The AP01M-1220 is a compiled product consisting of the following:
- Metal Housing with space for batteries and knock-outs for the signal cable wiring as well as the power mains cable
- One mounted Aliro AP Access Point Controller PCB
- One Power Supply Unit (PSU) including battery charging capabilities and outputs for mains loss and low battery voltage.
The PSU incorporates a battery management system comprising low battery voltage detection and deep discharge protection to ensure that the battery is not permanently damaged through excessive discharge.
A brownout filter ensures that short mains voltage dips do not create a false loss of mains alarm.
Two LEDs assist with quick and easy installation by showing presence of mains, correct battery charging and a fault condition.
Comprehensive protection is built-in as standard including mains transient filtering, electronic output overload protection and fuses on the load and battery outputs.
Operational time (Example): One AP + one reader AR40S-MF + magnetic lock (current 0.85A). Door set locked. Maximum time: 8.5 hours with 1 x 12V, 7.0 Ah battery.
Technical data
| Door capacity | 1 |
| Number of card reader | 4* Vanderbilt OSDP |
| Number of users | 10 000 |
| Card capacity | 100 000 |
| Card readers protocols accepted | Vanderbilt OSDP, Clock & data, Wiegand |
| Inputs / outputs | Outputs:
1* Mono stable relay
1* Bi-stable relay
4* Open collector
Inputs:
4* inputs |
| End of line concept | Set by on-board jumpers |
| Tamper | Yes, lid and wall removal. |
| Battery charger | Yes |
| Battery lifetime | Example: One AP + one reader AR40S-MF + magnetic lock (current 0.85A). Door set locked. maximum time: 8.5 hours with 1 x 12V, 7.0 Ah battery. |
| Input voltage | 100-240VAC / (90 – 265VAC) |
| Operating temperature range | -10 to +40°C, 75% RH non-condensing |
| Room for battery | 1 x 7.2Ah 12V. |
| Housing material | Metal |
| Colour | Off white |
| Dimensions (W x H x D) | 355*330*85 |
| Weight (without battery) | 4,0 kg |
| Approval | 2004/108/EC on Electromagnetic Compatibility (EMC). |
