380N/UK Telephone interface
The 380N/UK is a self contained telephone interface module for use on an analogue telephone line. Its primary function is to enable a user to communicate with an analogue telephone line and a door entry point (or points) using the same telephone handset. The handset can be a standard corded model, a cordless such as a DECT telephone or even a hands free telephone.
The 380N/UK can also be configured for use with a PABX (Private Automatic Branch Exchange) telephone system to be connected into either a spare analogue trunk input or spare telephone extension. All programming is carried out using the telephone keypad (utilising standard DTMF tones).
Features
- Communicate with both a telephone line and door entry points
- Open a door using the telephone keypad
- Open the speech to a door entry point without being called first
- Activate up to two auxiliary outputs (momentary or latching)
- Reverse the door open relay for use with fail safe lock releases
- Programmable adjustments including: number of rings, door open time, door open key, speech volume
- Divert call to pre-programmed number
- Program an access code to lock programming settings
- PABX mode allows the unit to operate without a telephone line (also allows it to be connected to a PABX telephone system)
- Dial in facility allow the 380N/UK to be activated from an incoming call
Technical Details
- Input voltage: 230Vac mains input (50/60Hz)
- Max REN output: 2
- Output voltage: 2x 12Vdc output (200mA max.)
- Relay output: C, NO (reversible NO output to NC)
- Auxiliary outputs: A1, A2 (transistor switched low output 200mA max.)
- Telephone line input: L1, L2 or RJ11 socket
- Telephone line output: T1, T2
- Telephone line connection: Standard incoming BT line (analogue) or PABX system (analogue trunk input or analogue extension)
- Ringing frequency adjustment: JPA, JPB (25Hz or 50Hz)
- Speech volume controls: electronically via programming and/or balance control POT
- Programming: Via telephone keypad (compatible with standard DTMF tones)
- System compatibility: Videx – 3+1, 4+1, 5+1 audio systems, VX2200 and VX2300 digital systems
- Mounting: Surface – DIN bar or direct wall fixing
- Dimensions: 157.5mm x 105mm x 65mm (9 module DIN)
Product Variants
- 380N – Telephone interface module
- 2280-1 – Interface module for the VX2200 digital system
- 2380 – Interface module for the VX2300 digital system
- BT100 – BT surface master socket
