Mono video concierge for VX2200
Description
The concierge can be used to make and receive calls from/to apartments and includes a 4" mono monitor to see the picture from entrance panel cameras, intercept calls from entrance panels and call entrance panels. There are three modes of operation, day mode in which all calls are directed to the concierge, night mode where only calls for the concierge are directed at the concierge, all other calls from entrances go direct to the apartments and off mode for when the concierge is off duty.
Technical Details
387 36 VX138 Amplifier module for VR VX2200 panels Amplifier, speaker/interface unit for VX2200 vandal resistant door panels This module is used in the VX2200 2 wire audio, 6 wire video functional vandal resistant door panels and includes all features required for audio & video installations. A 13.8Vdc PSU is required to power this system. Up to 23 buttons can be connected to this module. (This module cannot be used with 316x phones). Amplifier module for VR VX2200 panels Accessories136.jpg DatasheetsVX2200.pdf ManualsVX2200.pdf Mounting - Inside VR panel
System - VX2200
Power - 12Vdc
Call status LED's (Busy-Red, Speak-Yellow, Open-Green)
Push to exit button input - Yes
388 36 512D (SP317) Extension sounder for VX2200 Wall mount Extension sounder for VX2200 systems. Compatible with the "2 wire" BUS and has an 8 way Dip-switch to program the address of the device. Up to 3 units can be addressed with the same number (Ex.: 1 intercom and 2 extension sounders to be operated with the same apartment number). The call tone is different according to the origin of the call (Main entrance call or local door bell). A two level volume control is available using jumper JP1 (only for 512D, while for 512DR the JP1 is not used and stays in position "H"). Through the jumper JP2 it is possible to set the number of rings (512D) or the number of relay pulses (512DR) between 1 or 6. The current consumption on the BUS line is less than 1mA in stand-by mode. The Art.512DR can also be used as a "service relay" for the entire BUS, activated by the alarm signal from an apartment. To use this function it is necessary to give the unit the address 255. Extension sounder for VX2200 Accessories512A.jpg DatasheetsVX2200.pdf ManualsVX2200.pdf Systems - VX2200
Dimensions - 110mm(L) x 70mm(W) x 30mm(D)
Mounting - Wall
Material - White ABS plastic
389 36 ES/2 (SP42) Extension strobe for VX2200 Extension Strobe for 2200 systems - requires local 12Vdc PSU Used as an extension within an apartment this device will flash when the telephone rings. Requires a local 12Vdc PSU to power the strobe and connects to the 2 wire bus. Address using the 8 way dip switch bank to match that of the telephone in that apartment. Extension strobe for VX2200 AccessoriesES-1.jpg DatasheetsVX2200.pdf ManualsVX2200.pdf Input - 12dc and bus
Material - Plastic
Mounting - Wall
Strobe - Amber
390 36 2210A (SP310) Audio concierge for VX2200 Audio Concierge unit for VX2200 systems. The concierge can be used to make and receive calls from/to apartments, intercept calls from entrance panels and call entrance panels. There are three modes of operation, day mode in which all calls are directed to the concierge, night mode where only calls for the concierge are directed at the concierge, all other calls from entrances go direct to the apartments and off mode for when the concierge is off duty.
Audio concierge for VX2200 Accessories2210A.jpg DatasheetsVX2200.pdf ManualsVX2200.pdf BrochuresVIDEXCatalogue.pdf System - VX2200
Video - Mono 4" screen
Modes - 3
PC input - Yes
Max. Apartments - 998
Voltage - 12Vdc
Max. Current consumption - 350mA
391 36 2210V (SP311) Mono video concierge for VX2200 Mono video Concierge unit for VX2200 systems. The concierge can be used to make and receive calls from/to apartments and includes a 4" mono monitor to see the picture from entrance panel cameras, intercept calls from entrance panels and call entrance panels. There are three modes of operation, day mode in which all calls are directed to the concierge, night mode where only calls for the concierge are directed at the concierge, all other calls from entrances go direct to the apartments and off mode for when the concierge is off duty.
Mono video concierge for VX2200 Accessories2210V.jpg DatasheetsVX2200.pdf ManualsVX2200.pdf BrochuresVIDEXCatalogue.pdf System - VX2200
Video - No
Modes - 3
PC input - Yes
Max. Apartments - 998
Voltage - 12Vdc
Max. Current consumption - 350mA
Dimensions - 328.5mm(W) x 230mm (H)
ART 2210V
Obsolete
