Genie Hd-Ahd/Cvi/Tvi Passive Balun Kit Tx+Rx c/w Pigtail+12V+Data Pair

The Genie HDUBKITVPD is a video balun that can use a single cost-effective ethernet cable to extend HD-TVI / AHD / HD-CVI / CVBS signal and power, with the transmission distance up to 300m and the resolution up to 4K (8MP). The equipped power plug can also provide power from the local power supply for a remote CCTV camera and the pigtail design allows you to have an easier, faster connection experience. The balun also has built-in ESD, EFT, and surge protection components, allowing the unit to have a longer product lifespan.

  • Resolution up to 4K (8MP)
  • Signal extension up to 300M over CAT5e (or greater) cable
  • Built with DC Jack, and 2 bare wire for power & RS485 transmission
  • Male BNC to RJ45 connector design
  • Built-in ESD, EFT(impulse noise) and transient protection
Weight 0.03 kg
Maximum Video Resolution 8MP (4K)
Maximum Transmission Distance HD-TVI – 100m at 1080p
AHD – 250m at 8MP
HD-CVI – 200m at 8MP
CVBS – 300m (NTSC / PAL)
Signal Bandwidth 50Hz to 60MHz (-3dB)
Video Input/ Output 1 x BNC (1 Vp-p, 75 Ohm)
Link Interface 1 x RJ45 (100 Ohm)
Power Interface 1 x DC Plug (ø2.1 x 5.5mm),
1 x DC Jack
RS485 Interface DC Plug: 1 x Data Cable,
DC Jack: 1 x Data Cable
ESD Protection 30kV(Air), 15kV (Contact), IEC 61000-4-2
EFT Protection 40A(5/50ns), IEC 61000-4-4
Lightning Protection 2A (8/20μs), IEC 61000-4-5
Response Time < 1 ns
Temperature Operating: 0 to 55°C
Storage: -20 to 85°C
Humidity: Up to 95%
Dimensions 52.8 x 25 x 20.7mm & 120mm pigtail cable
Weight 45g

 

  • Model: HDUBKITVPD
  • Shipping Weight: 0.5 kgs
  • Manufactured by: Genie CCTV
Ask a Question

£22.32 Ex VAT

Add to Cart:

Manufacturer Info

datasheet