| Detection Area |
Programmable between 25m & 50m |
| Coverage |
13 degrees detection angle, 50m x 10m coverage max. Two Fresnel lenses giving up to 50m x 5m or 50m x 10m (Standard) |
| Adjustment |
180° pan + 90° tilt |
| Customised Optics |
Double silicon shielded quad element eliminates 50,000 Lux of white light |
| Outputs |
Silent solid state magnetically immune |
| Alarm 1 & Alarm 2 |
Volt free relay signal contact 24V AC/DC @ 50mA with an integral 25Ω series resistor, selectable N/O & N/C Adjustable timer options: 2 to 60 seconds |
| Output ‘A’ |
Open collector negative switching – 25mA max Alarm period 400ms |
| Output ‘S’ |
Open collector negative switching – 25mA max Alarm period: detection + 60 seconds Adjustable: Dusk (2 Lux) to 24 hour |
| Output ‘T’ |
Tamper Volt free, normally closed switch output |
| Tamper Switches |
Front and rear tamper switches; case open and removal from wall |
| Power Input |
9 to 24 V AC/DC |
| Current |
9mA (12V nominal) |
| Pulse Count |
1 - 2 |
| Temp. Compensation |
Digital sensitivity adjustment |
| Control |
Digital microprocessor – non volatile memory |
| Walk Test |
Output test mode with LED indication |
| Operating Temp. |
-20 to +55 Centigrade Conformal coated electronics for increased stability |
| Housing |
High impact zinc alloy |
| Protection Rating |
IP 65 |
| Dimensions |
145 x 120 x 115 mm |
| Weight |
750 grams NET, 880 grams GROSS |
| Mounting Height |
Variable - optimum height 3 metres |
| Cable < 200m |
Using all five outputs (including tamper) – 12 core 7/0.2mm |
| Cable < 500m |
Using all five outputs (including tamper) – 12 core 16/0.2mm |
