Takex 50m External Quad Active Beam Sensor

The professional choice in outdoor protection, our Quad Beam detectors synchronise sixteen beam paths for maximum stability in severe weather conditions, perfect for long range perimeter intruder detection.

4 x synchronised high power beams
double modulation for unsurpassed light immunity
auto-gain control (AGC)
50,000 lux sunlight immunity
IP55 housing

Type	Quad Beam
Detection system	Near infrared beam interruption system (4 beam simultaneous interruption)
Infrared beam	Double modulation pulsed beams by LED
Detection distance	Outdoor 165’ (50m) or less
Max. arrival distance	1650’ (500m)
Frequency Selection	Single Channel
Response time	50msec. to 700msec. variable (Standard: 50msec.)
Supply voltage	12V to 30V DC (non-polarity)
Current consumption	60mA or less at protection (max. 95mA or less)
Alarm output	Dry contact relay: NO or NC (selectable) Reset: Interruption time + off-delay (approx.1.5sec) Contact capacity: 30V (AC/DC) 1A or less
Tamper output	Dry contact: NC Contact operation: Output when cover is detached Contact capacity: 30V (AC/DC) 0.1A or less
LED indicator	Red LED (Receiver) ON : when an alarm is initiated. ON : when beam is attenuated.
Functions	Tone indicator, Alarm memory indication, Programmed AGC, Auto-gain lock, Monitor jack, Target color
Adjustment	Horizontal: ±90° Vertical: ±10°
Mounting position	Outdoor
Wiring	Terminals
Weight	Transmitter: 42oz (1,200g) Receiver: 45.5oz (1,300g)
Appearance	Resin (wine red)