The Genie RF200V is a high quality 7 channel 5.8GHz audio / video wireless interface. The kit consists of a transmitter, receiver and wall bracket. Both units are housed in a small IP65 enclosure, so mounting outdoors is possible without the need for additional external water resistant enclosures. The receiver also comes with a mounting bracket providing X & Y movement for alignment purposes. The transmitter and receiver both use a directional patch antenna to reduce external interference. The receiver has a built in 7 bar signal strength meter to obtain the best possible reception during an installation; a very important stage to help guarantee a reliable wireless video link.
- 5.8GHz
- IP65 rated
- 7 RF channels
- 12 volt operation
- High quality audio & video
- 200m range (Line of site)
- 7 LED signal strength meter (RSSI)
- Digital input for PIR, external switch etc
- Volt free outputs for both tamper and input
channels
- Directional antenna on receiver (Reduced
interference)
- LED status to monitor transmitter
- Heavy duty receiver wall bracket for X & Y
movement
- Tamper monitors case switches, external
input & loss of transmitter
| Weight |
0.74 kg |
| Operating Voltage |
11—13V DC (Max) |
| Operating Current (Transmitter) |
160mA (Max) |
| Operating Current (Receiver) |
200mA (Max) |
| Relays Maximum Working Voltage |
30V AC / DC |
| Relay Contact Type |
Volt Free |
| Relay 1 & 2 Max Current |
1A |
| Input & Tamper Input |
12V Active Low |
| Operating Frequencies (Transmitter) |
5.740 ~ 5.860GHz |
| Transmit Power |
<= 14dBm |
| Video Input |
1Vpp |
| Audio Input |
1.5Vpp |
| Audio / Video Modulation |
FM—FM |
| Operating Frequencies (Receiver) |
5.740 ~ 5.860GHz |
| RF Input Level |
-85 ~ -10dBm |
| Video Output |
1Vpp (50Hz ~ 5.5MHz) |
| Audio Output |
1.5Vpp (50Hz ~ 20KHz) |
| Temperature Range |
-10 to +55°C |
| Ingress Protection |
IP65 |
| Relative Humidity |
95% (Non-Condensing) |
| Case Size without Aerial and Grommet |
115 x 65 x 40mm |
