The TWINFLEXpro two wire fire alarm system incorporating the Multipoint ASD combined smoke and heat detector with optional built-in sounder and strobe, allows the whole system to be easily installed using only one pair of wires per zone.
Using the Multipoint ASD detector as part of the TWINFLEXpro two wire fire alarm system means that when a detector is wired to the system, a sounder and strobe can also be connected without extra installation time or cost. This greatly reduces the number of points that need to be installed and the time it takes to install. As Multipoint ASD offers 7 different modes of detection, the installation is made even simpler since one device suits all applications. Whatever type of detection is required, it can be selected by the flick of a switch at the time of commissioning - 3 different smoke modes, 2 fixed temperature heat modes, a rate of rise mode and a combination smoke or heat mode.
As the Multipoint ASD detector is available with or without a full specification integral 90 dBA sounder no extra devices need to be purchased when audible warning is required. If extra sound is required or for areas that do not require detection, then a choice of several different standalone sounders, call points or sounder beacons can be used on the same two wires.
This versatile system has the ability to differentiate between call point or detector alarm; can accommodate a maximum of 32 devices per zone; has separate fault monitoring display for each zone; and a man walk test facility and zones that can be configured without the need to use resistors or capacitors. To make the TWINFLEXpro system even more flexible, Fike can also provide a special Output Unit. This can be situated anywhere on the zone circuit, and is ideal for connecting to plant shutdown, door release mechanisms etc.
Key Features:
Two wire installation - only one circuit per zone to connect detectors and sounders - installation savings can be as high as 40%.
Call point identification.
Built-in end-of-line all devices - No resistors or extra circuits are required.
7 modes of detection.
Complies to BS5839 and EN54.
Up to 32 devices per zone.
Easy to install.
2, 4 & 8 zone panels.
Up to 72 Hour standby capacity.
Multipoint saves the cost of a sounder and/or strobe.
Warning of head contamination, before going into false alarm.
TwinflexPro Boxed kit comprising of:-
1 x TwinflexPro 8 Zone panel
6 x Twinflex Multipoint ASD detectors w/s
1 x Twinflex Multipoint ASD Sounder Strobe
2 x Callpoints
1 x AS Head Removal Tool
