The Addressable Loop Sounder/Strobe is a loop driven audible and visual warning device.
The device is fitted with an integral sounder capable of providing one of 6 different tones and operating at 65, 80 or 85dB(A) dependant on programming, also included is a 16 LED strobe unit to provide visual indication in an alarm condition.
Short circuit isolators are built into the device in order to protect the system in the event of a cable fault.
This sounder/strobe is compatible with Fike’s SITA200plus, Duonet and Quadnet intelligent control panels.
Its operating parameters are configured using the panel’s programming software and are stored within the Flash memory in the device.
This on-board intelligence allows each device to report and respond directly to the control panel without having to wait until it is polled.
This enhanced digital protocol means less information is needed to be sent between the device and the host control panel, resulting in faster, more reliable communication
Technical Specification
| Dimensions |
Diameter: 97mm
Depth: Low Profile Base 60mm
Depth: Deep Base 82mm
|
| Operating Temperature |
-10°C to +50°C. |
| Voltage Range |
24V to 42V DC |
| Sounder Volume |
Low: 65dB(A) +
Medium: 80dB(A)
High: 85dB(A)
|
| IP Rating |
IP21C |
| Strobe Operation |
5ms on / 1s interval |
| System Compatibility |
SITA200plus: V2.30 onwards
Duonet and Quadnet: V1 onwards
|
| Battery Current @ 24V DC |
Quiescent: 0.172mA
Active: No Sounder 18.750mA
Active: Low Sounder 19.792mA
Active: Med Sounder 23.958mA
Active: High Sounder 28.125mA
|
| Device Loading Unit Rating |
No Sounder: 9
Low Sounder: 9.5
Med Sounder: 11.5
High Sounder: 13.5
|
