The Twinflex Manual Call Point (MCP) is a ‘resettable’ style MCP that has the option of being flush fitted if required. Once operated the device latches into the alarm position and requires manually resetting via a special key. The device has been designed to fit a standard UK single gang deep (47mm min) back box and each MCP comes supplied with a flush fitting adaptor. The device is fitted with a single colour red LED to indicate activation and End Of Line status.
This MCP is compatible with Fike’s Twinflex range of control panels and may be installed on the same zone as the Multipoint detector/sounder and associated Twinflex devices. Its operating parameters are configured using a DIL switch on the rear of the device.
| Dimensions |
Width x Height: 88mm x 88mm
Depth: Standard inc base 52mm
Depth: Flush mounted 25mm
|
| Operating Temperature |
-10°C to +50°C |
| Voltage Range |
20 to 35V DC |
| LED Indication |
Activated: 0.5 Second Interval
End Of Line: 5 Second Interval
|
| System Compatibility |
Twinflex: V1 onwards
TwinflexPro: V1 onwards
|
| Zone Current @ 24VDC |
Quiescent: 50uA
Active: 16mA
|
| SLU Rating |
3 |
| DLU Rating |
16 |
