PYRONIX (UR2-WE) Standalone receiver Enforcer Series two-way radio traffic
Stand-alone receiver with two-way radio traffic works with wireless detectors and remote controls Pyronix series Enforcer and gives information about their operation by 2 relay outputs for "Alarm". Receiver UR2-WE supports up to 32 wireless devices. The relay outputs of the receiver can be connected to a wired loops Most of the control panels (AUC) from different manufacturers.
Radio channel device Enforcer Series provides:
- Range of up to 1600 meters in open space;
- The detector works on batteries for about 3 years.
- Indication of the level of the signal on the control panel and to install the detector in real time (SSI);
- Instant two-way control units (ITDC);
- 128-bit encryption protocol traffic (TDE);
- Programmable control wireless communications;
- Mining algorithms detect radio interference.
Receiver with a two-way radio traffic has different algorithms to radio detectors, depending on the security mode of the panel. Special entry "Arming" on UR2-WE must come from the panel and must indicate the current mode of protection. It is necessary to PPKOP that connects to the receiver, has a programmable output, showing the status of protection. The algorithm works include "protection mode" is configured.
The UR2-WE have built-in digital display and event log memory. Indication of power, triggering all outputs.
Simple entry of information on the detector in the receiver's memory. It uses several micro switches and a digital indicator on the receiver.
Extender conforms to European standards: EN50131-2-4: 2008, EN50131-5-3: 2005 + A1: 2008, PD6662: 2010, Security Grade 2.
Key Features of the receiver:
- Supports up to 32 wireless detectors distributed over 2 channels "Alarm";
- On each channel, you can "register" to 10 wireless detectors and remote controls 6;
- 2 relay outputs "Alarm": 3A, 30V, type NC / NO;
- 1 output "Fault" combining signals "tamper", "test" and "handicap". Relay: 3A, 30V, type NC / NO;
- 1 input "mode of protection" to determine the mode rabrty panel (arming / disarming). The type of signal input is programmed to operate;
- Power supply: 9-15V DC;
- The operating frequency of 868MHz;
- Dimensions: 173 × 125 × 32mm;
- Compatible with wireless detectors and remote controls series Enforcer.
