Texecom Premier Elite Odyssey 5 Backplate

Premier Elite Odyssey 5 External Sounder & Stobe Units

The ultimate blend of form and function. With stunning low-profile aesthetics the unique mechanical design improves lens contrast, resulting in superior strobe visibility even in direct sunlight.

Texecom’s new Premier Elite Odyssey external sounders combine high output audible and visual alarm signaling, conforming to PD6662:2010 Grade 3 Class IV. Premier Elite Odyssey external sounders feature:

  • Twin Piezo Sounders Producing 115dB(A)
  • IP65 Sealed Electronics Module
  • Wall, Lid & Screw Tamper Detection
  • Patented Engineer Hold-Off Mode
  • Range of Colours Available
  • Battery Monitoring with Fault Output
  • PD6662:2010 Grade 3 Class IV
  • EN50131-1, EN50131-4 Grade 3 Class IV

Triple Tamper Detection The captive screw fixing method when combined with a tamper switch, provides the earliest possible indication of unauthorised access to the unit. The fully adjustable wall & lid tamper switch provides maximum flexibility to each installation.

Low Current (LC) Mode Low current mode is jumper selectable, as with SCB mode it enables a reduction in current drawn from the control panel, to allow installation of additional external sounders. Low current mode maintains significant sounder volume

Patented Engineer Hold-of Mode Installation and maintenance is made quick, simple and safe by a revolutionary patented safety engineer hold-off mode. On power up the hold-off mode is automatically enabled, preventing the unit from sounding until the tamper circuit is secure. This enables “one trip up the ladder” installation. Hold-off mode can be re-invoked at any time from the control panel, ensuring easy maintenance and verification

IP65 Sealed Electronics Module The advanced electronic module of the Odyssey 5 is protected by a robust inner cover assembly with gasket seal. This maximises protection from dust and moisture, sealing to IP65 rating which enables prolonged exposure to harsher environments without compromising performance or functionality

Premier Odyssey 5E This cost-effective version is also available, featuring the same contemporary styling and major breakthroughs of the Premeir Elite Odyssey 5. Aimed at residential installations the Premier Odyssey 5E has a single piezo sounder producing 109dB volume and an adjustable wall & lid tamper switch. The fully enclosed electronics module is protected to IP44 standard

Electrical  
Supply Voltage: 12-16 VDC (13.7 nominal)
Current Drain (typical at 13.7VDC):

Strobe: 100mA

Ody 5: 405mA 190mA 30mA

Ody 5E: 285mA 160mA 30mA

Quiescent: 18mA

Standby Battery

Type: NiMh Stack

Voltage: 7.2VDC (nominal)

Capacity: 250mAh

Flash Tube: 1Ws Xenon
Flash Rate: 1Hz (typical)*
Discharge Time (<60VDC): <180 seconds
Comfort LEDs Brightness: 100mcd (typical)
Flash Rate (tamper secure): 1Hz alternating (typical)
Environmental  
Volume (SAB mode at 13.7VDC)

Ody 5: 115dB Peak at 1m (A Weighting, 90˚)

Ody 5E: 109dB Peak at 1m (A Weighting, 90˚)

Cut-Off Time: <15 minutes
Environmental Protection:

Ody 5: IP65

Ody 5E: IP44

Operating Temperature: -25˚C (-13˚F) to +55˚C (+131˚F)
Storage Temperature: -25˚C (-13˚F) to +60˚C (+140˚F)
EMC Environment: Residential / Commercial / Industrial
Physical  
Material 3mm Ploycarbonate
Tamper Detection

Ody 5: Wall, screw & lid

Ody 5E: Wall & lid

Dimensions (h x w x d) 284mm x 256mm x 68mm
Packed Weight 1250g (44oz) approx

 

  • Model: FCE-0042
  • Shipping Weight: 0.7 kgs
  • Manufactured by: Texecom
Ask a Question

£37.19 Ex VAT

Add to Cart:

Manufacturer Info

datasheet