| SPECIFICATIONS |
|
| Detection system |
[Flame Sensor]
Ultraviolet rays (Detection wave length 185 to 260nm)
[PIR Sensor]
Passive infrared
|
| Coverage |
[Flame Sensor]
33' (10m) with 2.75'' (7cm) lighter flame in front
Approx. 120° conically
[PIR Sensor]
Wide Angle 33' (10m)
|
| Sensitive zone |
[PIR Sensor]
Max. 29 pairs
|
| Area adjustment |
[PIR Sensor]
3 steps
|
| Supply voltage |
10V to 30VDC (non-polarity)
|
| Current consumption |
20mA Max.
|
| Alarm output |
Individual mode:
Flame sensor output (From ALARM① terminal)
• Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
• Contact operation : Detection time + off delay. (Approx. 2 sec.)
• Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)
Passive sensor output (From ALARM② terminal)
• Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
• Contact operation : One shot (Approx. 2 sec.)
• Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)
AND mode:
Forced flame signal output (From ALARM① terminal)
When the flame sensor detects a flame twice during the selected AND timer. (Detection time + off delay. Approx. 2 sec.)
Or
When the flame sensor continues to detect a flame for flame duration time 15 or 30 sec. (Detection time after 15/30 sec + off delay. Approx. 2 sec.)
・Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
・Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)
AND detection signal output (From ALARM② terminal)
When both passive and flame sensors detect during the selected AND timer. (Detection time, Min. 2 sec.)
・Dry contact relay (Semi-Conductor) (N.O./N.C. selectable)
・Contact capacity : 30V (AC/DC) 0.25A Max. (resistive load)
|
| Alarm memory |
Reset after blinking (3 min) and lighting (47 min)
(Operate flame and passive LED individually)
|
| Tamper output |
Dry contact relay N.C.
(Activated when the front cover is detached)
Contact capacity: 30V (AC/DC) 0.1A Max. (resistive load)
|
| LED indicator |
[Flame Sensor] Red LED:
• Lighting at alarm (Detection time + off delay. Approx. 2 sec.)
• Blinking (3 min) and Lighting (47 min) at memory
[PIR Sensor] Red LED:
• Lighting at alarm (One shot, Approx. 2 sec.)
• Blinking (3 min) and Lighting (47 min) at memory
• Lighting at trouble.
|
| Functions |
[Flame Sensor]
Detection timer (1sec, 3sec)
|
| Sensitivity adjustment |
[Flame Sensor]
Detection sensitivity (H [100%], L[50%])
*Detection sensitivity can be set only at "Individual" mode.
*H[100%] is fixed at "AND" mode.
|
| Mounting position |
Indoor wall surface (Ceiling with optional attachment “BCW-401”)
|
| Wiring |
Terminals
|
| Weight |
Approx. 120g
|
| Appearance |
Resin
|
