Takex UV Flame Sensor with Built-in Sounder 10m Range

The FS-1000E sensor quickly detects ultraviolet rays contained in flames and activates a built-in alarm sound plus an open collector output.

Model	FS-1000E
Detection system	Ultraviolet rays detection (detected wave length 180~260nm)
Detection distance	10m (33ft) max. (7cm flame)
Detection angle	Approx. 120 degrees (conically)
Detection timer	3 steps changeover by slide switch H (0.2 sec), M (1 sec), L (6 sec)
Power supply	Type-3 alkaline battery (LR6) x2 (3V) - included Lithium battery (CR17450E-R-2-CM2) x1 (3V) - optional External power supply 9V to 30VDC with polarity
Power consumption	Standby: 50μA max. (battery) / 5mA (DC) Alarm: 50mA max. when buzzer sounds
LED (red)	LED alarm: blinking every 0.2 sec during off-delay 10 sec Low battery: light on 0.1 sec every 5 sec.
Buzzer	Alarm: intermittent every 0.2 sec during off delay 10 sec Low battery: sound 0.1 sec every 5 sec. Volume: 80dB or more 1m (3.3ft) ahead (silent setting is available by cutting internal jumper line)
Wiring	Terminals
Ambient temperature	-10°C to +60°C (+14°F to +140°F) (battery performance may decrease below 0°C and above 40°C
Installation	Indoor (ceiling or wall mount)
Weight	Approx. 200g (7oz)
Appearance	ABS resin (white)
Supplied accessories	· Battery case (Type-3): 1pc · Type-3 alkaline battery (LR6): 2pcs · Sensor locking screw: 1pc · Tapping screw: 2pcs