General
|
|
|
Product name |
M600 |
|
Security Grade |
PD6662: 2004, EN50131-1:2006, TS50131-3:2003, EN50131-6:1997, Grade 1, or 2. DD243:2004. |
|
Sales number |
M600KEP |
|
Product Description |
40 Zone Grade 2 Panel with comms |
|
|
|
Capacities
|
|
|
Max zones |
40 |
|
Zones - on board |
8, CC or FSL |
|
Zones - on expander(s) |
32 |
|
Standard wired outputs - on board |
3 |
|
Communicator outputs: |
8 |
|
Outputs on expander module(s) |
None |
|
Setting Levels: |
Full set for each ward |
|
Partitions: |
4 |
|
Log capacity (events): |
1000 |
|
No. Keypads |
16 max |
|
Internal Clock |
±10 minutes over one year (depending on the accuracy of the mains supply frequency). |
|
Downloader |
Yes |
|
Remote Servicing |
None |
|
|
|
Security
|
|
|
Access code |
4 or 6 digits |
|
Number of user codes |
50 |
|
Code blocking |
Programmable |
|
Proximity tag differs |
4,294,967,296 |
|
Back tamper (in addition to lid tamper) |
Separate terminals |
|
|
|
Physical
|
|
|
End Station dimensions: |
385(W), 312(H), 95(D) mm |
|
End Station weight (w/o battery): |
4.9 Kg |
|
Case material |
1.2mm mild steel |
|
|
|
Keypad
|
|
|
Keypad name |
MKP1, MKP2, MKP3 |
|
|
|
Environmental
|
|
|
Environmental Grade |
Class II |
|
Operating temperature |
-10 to 40 C |
|
Humidity |
0 to 75% RH, non-condensing. |
|
|
|
Radio
|
|
|
Expander/Built-in: |
Expander (MRNode) |
|
|
|
PSTN Communications
|
|
|
Built in Communicator |
Yes |
|
Plug on communicator |
No |
Plug-by communicator
(uses screw terminals) |
Yes |
|
Protocols: |
Fast Format, SIA, SIA II, SIA III, Extended SIA II, Contact ID |
|
Speech Dialler |
No |
|
ATS rating |
2 |
|
Line sharing |
Yes |
|
REN |
0.2 |
|
|
|
Power Supply
|
|
|
EN50131-6 Type |
A |
|
Mains power supply |
145mA @ 230Vac±10%, 50Hz |
|
End station psu |
13.65VDC, 1.25A. |
|
End station consumption |
200mA |
|
Communicator consumption |
n/a |
|
Standby Battery |
12VDC, lead-acid |
|
Max recharge time: |
24 hrs max. for 17AH battery |
|
Battery charge limit |
750mA |
|
12V Aux supply (inc LS) |
Depends on attached peripherals |
|
14V4 supply |
None |
|
|
|
Data Connections
|
|
|
RS232 |
No |
|
USB |
Yes |
|
Printer |
Yes, three pin serial RS232 |
|
Ethernet |
None |
|
ISDN |
None |
|
GSM |
None |
|
GPRS |
None |
|
Engineer keypad port |
Yes |
|
|
|
Wired Outputs
|
|
|
Bell trigger |
Switched -ve @500mA |
|
Strobe trigger |
Switched -ve @500mA |
|
H/0+ (positive holdoff) |
Yes |
|
H/0- (negative holdoff) |
Yes |
|
O/P 1 |
1 voltage-free changeover 1A max @ 24Vac or 24Vdc |
|
O/P 2 |
Switched -ve @500mA |
|
O/P 3 |
Switched +ve @500mA |
|
O/P 4 |
n/a |
|
O/P 5-8 |
n/a |
|
LS (loudspeaker) |
16 Ohms |
|
Communication outputs |
8. Source 5mA in 12V condition, sink 100mA in 0V condition, selectable output sense |
|
ST (Siren test) |
None |
|
|
|
Wired Inputs
|
|
|
TR |
Yes, -ve |
|
Tellback/Remote reset** |
Yes, 0V applied |
|
Line Fault input** |
Yes, +12V applied |
|
Aux Tmp |
Yes |
|
|
|
Fuses
|
|
|
Mains |
T315mA 250V 20mm |
|
Other |
The panel uses fast-acting polyswitch fuses for overcurrent protection: |
