500m wireless receiver with an expandable amount of channels
The D-TECT X Receiver is a 500 metre range, 4 channel receiver expandable to 16 channels. The receiver is compatible with the D-TECT X ranges of wireless detectors and communication using 868MHz transmission protocol.
This D-TECT X receiver can be expanded with the addition of up to three further 4 channel expansion modules. This allows the receiver unit to monitor the active state of up to 16 wireless D-TECT X movement detectors.
- The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500 metres in line of sight to the detectors
- Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
- As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a ‘RF Loss’ LED switches on and the contact is activated at the receiver
- An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery
- The D-TECT X receiver is powered by a 12 - 24V AC/DC supply
Technical Specification
COMMUNICATION RANGE |
Up to 500 m (line of sight) |
COMMUNICATION CODES |
16,700,000, 868MHz |
POWER INPUT |
12 - 24V AC/DC |
INDICATORS (PER DETECTOR) |
1 x LED Detection 1 x LED Tamper 1 x LED RF loss 1 x LED Low battery indication |
OPERATING TEMPERATURE |
-20ºC to +55ºC Conformally coated electronics for increased stability |
CONNECTIONS |
1 x program socket for detectors. Expansion socket for connection to additional modules |
OUTPUTS (PER DETECTOR) |
2 volt-free, silent solid state magnetically immune contacts 2 neg. switched plus one common tamper (front and rear switches) 1 RF Loss 1 Low battery |
CAPACITY |
4 detector module fitted as standard 3 slots for additional 4 channel expansion modules (total 16 detectors) |
CASE |
High impact, flame retardant, UV stabilized Polycarbonate |
PROTECTION HOUSING |
Minimum IP55 |
DIMENSIONS |
210 x 180 x 75 mm (excluding aerial) |
WEIGHT |
658g NET, 720g GROSS |