GJD D-Tect X Receiver 500M Expandable Channels

500m wireless receiver with an expandable amount of channels

The D-TECT X Receiver is a 500 metre range, 4 channel receiver expandable to 16 channels. The receiver is compatible with the D-TECT X ranges of wireless detectors and communication using 868MHz transmission protocol.

This D-TECT X receiver can be expanded with the addition of up to three further 4 channel expansion modules. This allows the receiver unit to monitor the active state of up to 16 wireless D-TECT X movement detectors.

• The weatherproof IP55 receiver enclosure can be mounted externally or internally up to 500 metres in line of sight to the detectors
• Code recognition programming of each detector is both rapid and simple via a plug-in connector between detector and receiver
• As a system check, every one of up to 16 detectors automatically sends out a signal every 2 or 15 minutes to confirm that they are active. If a return signal is not received from a registered and recognised detector, a ‘RF Loss’ LED switches on and the contact is activated at the receiver
• An RF continuity test mode facility tests the strength of the RF signal from each detector at the receiver location. When it is necessary to conduct a site survey prior to installation, the receiver can be powered temporarily with a PP3 9 V battery
• The D-TECT X receiver is powered by a 12 - 24V AC/DC supply

Technical Specification