GJD Dygizone Security Lighting Kit Silver Dygizone Keypad GJD600

larger image

Obsolete

Available while stocks last

KIT Includes:

    2 x GJD910 Dygizone Lighting Controller
    1 x GJD040 Expansion Unit
    4 x GJD020 Opal XL External PIR Sensor

GJD910C DygiZone Lighting Controller complete with GJD040 Expanion Unit:

GJD Dygizone Multifunction 4 Zone Controller complete with GJD040 4 zone expansion unit

A Dygizone control panel for the front and back doors, expansion unit and then 4 Opal XL PIRs to monitor the whole perimeter of the property. This can then be connected to a warning device of your choice, be that audible or visual

Features:

Precise 24 hour control and monitoring of 4 zones of security lighting via a user-friendly control panel and modern LCD display.
Programmable functions that accurately control the activation, timing and duration of the lighting to minimise energy consumption and light pollution.
Any one of 5 mode settings can be programmed for each zone.
When the external GJD sensors are activated, the DygiZone indicates which Zone has been activated by either an audible beep or a 10 second pre-recordable voice message - and the Zone indicator is illuminated on the control panel.
2 programmable timers for each zone allows the lighting to be automatically switched on & off at pre-set periods for a pre-set time - ideal for when a building or premises are unoccupied.
A system overide can be made from up to 3 locations at any time.
The system can be expanded to enable up to a 30,000 Watts of lighting to be controlled and switched as required.

Specification:

Supply	12 VDC @ 20 mA standby. 100 mA triggered with message playback.
Display	Back lit blue LCD display showing real time clock, detector activation and zone status.
Audible	Internal warning tone. Individual tones for each zone or selectable 10 second voice recordable message for each zone.
Control	Four individual zone buttons for selecting zone status and programming options.
System configuration	Normally 1 Master and 1 Slave DygiZone. One additional Slave can be added if required. Requires GJD Expansion Units.
Time control	Two individual on/off timers per zone.
Mounting	Indoor use only. Mount in a clean dry location. Can be mounted on a standard single or double flush backbox.
Temperature	-10 to +55 degrees Centigrade.
Dimensions	134 (W) x 87 (H) x 30 (D) mm
Weight	190g NET, 260g, GROSS

4 x GJD 020 Opal XL External PIR Detector:

Fully adjustable both horizontally and vertically with a multifuntion lens to suit all applications. When positioned to individual requirements the module is protected with a UV stabilised lens cover which hides areas of coverage.

When used with the GJD range of security lighting controllers, 24 hour indication and movement activated lighting for a timed period is automatically provided.

The Opal XL is a reliable professional external passive infra red sensor with independent photocell to trigger lights during darkness with an adjustable range of up to 35 metres.

Write Review