| Supply |
12VDC @ 35mA nominal (9 to 15VDC max) |
| Reception |
Monitors signal from up to 3 Opal RFX PIR’s with high selectivity SAW filter |
| Outputs (CCTV) |
3 x independent volt free outputs. Selectable normally open (form A) or normally close (form B) Timers 0.4 to 60 seconds after last detection |
| Outputs (A) |
3 x independent switching - ve outputs (24hr) rated @ 25mA - 0.4 seconds on detection |
| Outputs (LUX) |
1 x photocell controlled -ve switching Adjustable: Dusk (2 lux) to 24 hour Active 60 seconds after last detection |
| Tamper |
Housing back and front tamper volt free output (form B) |
| RF Output |
3 x independent RF/loss of signal -ve switching rated @250mA |
| Low Battery |
Output - ve switching rated @250mA |
| Testing |
Independent channel active indicators attendance reporting |
| Processing |
Intelligent digital signal processing Plug in code memory transfer system Non volatile memory |
| Temperature |
-20° C + 55° C |
| Enclosure |
Weatherproof IP65 ABS housing |
| Weight |
340 grams |
| Dimensions |
210 high x 180 wide x 70mm deep |
