The BS8418 compliant D-TECT X MKIII detectors all feature quad PIR sensor modules, stylish plastic IP65 fully tampered housings with a discreet internal antenna. Units accept 2 x 3 Volt CR123 batteries (not provided), 500m RF transmission range on 868MHz and individual code for pairing to the receiver.
The receiver (GJD392) can be linked in its base form to 4 detectors and this can then be expanded up to 16 detectors, with the use of the GJD393 4-way expansion module.
Due to the number of individual detector codes (in excess of 16M), multiple receivers can be used on any site.
Technical Specification
| Transmission Range |
500m Line of sight |
| Detection Range |
50m x 10m |
| Detector Orientation |
180º pan & 90º tilt |
| Mounting Height |
Up to 6m - Optimum 3m |
| Tamper Switches |
Front & rear tamper switches, case open and removal from wall |
| Outputs from GJD392 D-TECT X Receiver - Per Detector |
1 Open Relay: 1 Closed Relay: Tamper; RF Loss; Low Battery, GJD Lighting System. |
| End of Line Resistance |
N/A |
| Power Input |
2 x CR123, 3 volt batteries* |
| Pulse Count |
1 - 2 |
| Photocell |
Dusk (2 Lux) to 24 hour |
| Housing & IP Rating |
High Impact ABS IP65 |
| BS8418 Complaint |
Yes |
