Gjd Opal Rfx 35M Wireless PIR

The Opal RFX is a robust external 35 metre PIR intruder detector, designed to detect and transmit reliable event-based triggers to the weatherproof RFX-3 Receiver. Maximum communication range 150 metres using 433MHz wireless transmission.

Requires 2 x AAA batteries, not supplied.

Security Installation Tips

Only use Alkaline batteries in the detectors, they won’t work with Lithium batteries. 2x AAAs needed for each detector.

Recommended installation heights are 1.5, 3 and 6 meters.

The three outputs on the receiver can be used to integrate a CCTV system, as well as controlling the security lights, they can be configured N/O or N/C.

Low Battery and RF loss terminals on board the receiver will notify you when something needs addressing.

Radio distance from receiver to detectors is 150 meters line of sight.

Unless it is a controlled environment, use a pulse setting of 2 on the detectors – this will increase stability.

Technical Specification

SUPPLY 2 x AAA Alkaline 1.5 volt (not supplied) Low power typical battery life two years
TRANSMISSION 150m line of sight: 433.92 MHz <10 mW frequency - SAW stabilised
COVERAGE RANGE 10 to 35m: 35 x 30m max. with 90º multifunction lens Internal adjustment 180º pan + 90º tilt
MOUNTING HEIGHTS (variable) 3m high for multi-beam coverage 6m high for curtain coverage and 1.5 for pet immunity (mask supplied)
PROCESSING Non-volatile memory: Intelligent signal processing: Digital & integral white light filter 16 million possible identification codes
ADJUSTMENTS Detection signal (CCTV) timer 0.4 to 60 secs. Light level signal 2 Lux to daylight Pulse count 1 (2 & 3≤6 seconds)
TEMPERATURE -20º C +55º C
DETECTOR HOUSING ABS high impact IP55 rated Weight - 152g Dimensions 110h x 100w x 100 deep

 

  • Model: GJD018
  • Shipping Weight: 0.8 kgs
  • Manufactured by: GJD
Ask a Question

£50.49 Ex VAT

Add to Cart:

Manufacturer Info

datasheet